Basic Install Instruction:
Using Strapping
- Install Top Bracket with the spring on top
- Install 3 straps of banding as shown
- Put banner on Pole and slide into socket
- Rotate pole in the socket to align to the
holes in Bracket
- Push Safety Pin through the side and the
Pole
- Repeat process for bottom bracket - this
time spring should be at bottom
- Install Top Bracket with the spring on top
- Install 3 straps of banding as shown
- Put banner on Pole and slide into socket
- Rotate pole in the socket to align to the
holes in Bracket
- Push Safety Pin through the side and the
Pole
- Repeat process for bottom bracket - this
time spring should be at bottom
Using Bolts
- Install Top Bracket with the spring on top
- Install using 2 x M10 Rawl Bolt or similar
through the holes in the back plate.
- Put banner on Pole and slide into socket
- Rotate pole in the socket to align to the
holes in Bracket
- Push Safety Pin through the side and the
Pole
- Repeat process for bottom bracket - this
time spring should be at bottom
- Install Top Bracket with the spring on top
- Install using 2 x M10 Rawl Bolt or similar
through the holes in the back plate.
- Put banner on Pole and slide into socket
- Rotate pole in the socket to align to the
holes in Bracket
- Push Safety Pin through the side and the
Pole
- Repeat process for bottom bracket - this
time spring should be at bottom
Contact Us
UK
t : +44 7440470601
e : info@bannersaver.co.uk
India
t : +91 98690 44999
e : brackets1@gmail.com
UK
t : +44 7440470601
e : info@bannersaver.co.uk
India
t : +91 98690 44999
e : brackets1@gmail.com
Combinations you can
use for installation
It is your responsibility to
make sure the structure
can take the loading.
use for installation
It is your responsibility to
make sure the structure
can take the loading.